| Class 215 | BOTTLES AND JARS |
| Click here for a printable version of this file | |
Expand/Contract Processing Please Wait
![[List of Pre Grant Publications for class 215 subclass 2]](../as.gif) | ![[List of Patents for class 215 subclass 2]](../ps.gif) | 2 | BOTTOM FILLED |
| | 3 | EJECTING |
| | 6 | COMPARTMENT |
| | 365 | CONTENT INDICATING |
| | 10 | NESTING |
| | 11.1 | NURSING BOTTLES AND NIPPLES |
| | 11.2 |  With temperature responsive indicator |
| | 11.3 | Collapsible liner or wall |
| | 11.4 | With valve for liquid |
| | 11.5 | With vent or valve for air |
| | 11.6 | With cover |
| | 12.1 | MULTILAYER BARRIER STRUCTURE |
| | 14 | NONREFILLABLE |
| | 40 | NECK |
| | 41 | Drip-preventing means |
| | 42 | Reinforcing structure |
| | 43 | Structure to receive a particular closure |
| | 46 | Means to aid in removing closure |
| | 47 | Frangible neck |
| | 200 | CLOSURES |
| | 201 | Having warning means or means impeding closure removal (e.g., child proof) |
| | 202 |  Barbed |
| | 203 | With exhibitive feature |
| | 204 | Receptacle opening sealed by each of plural closures |
| | 205 | Closure at or forms receptacle base |
| | 206 | Having registerable indicia to facilitate closure removal |
| | 207 | With key-actuated lock |
| | 208 | Multidirectional turn or twist type |
| | 209 | Closure removal includes receptacle deformation |
| | 210 | Closure removal includes receptacle tilting |
| | 211 | Closure or closure portion engagingly enters receptacle opening |
| | 212 |  Expandable |
| | 213 | With movable closure removal obstacle |
| | 214 | Closure guided in simultaneous turning and reciprocating movement (e.g., threaded) |
| | 215 | With provision for opening tool |
| | 216 | Flexible locking member integral with or attached to closure |
| | 217 | Closure guided in simultaneous turning and reciprocating movememnt (e.g., screw threaded) |
| | 218 | Closure threaded to receptacle and/or rotatable closure removal obstruction |
| | 219 | Encompassing closure removal obstacle and closure engaging for concurrent movement |
| | 221 | Closure removal obstacle movable to unobstructive position |
| | 222 | Quick removal (e.g., bayonet) |
| | 223 | Closure guided in sequential turning and reciprocating movement |
| | 224 | Snap-type closure |
| | 226 | Substitute closure having means to remove original closure |
| | 227 | With structure for removably holding an article or material |
| | 228 | Combined or convertible |
| | 230 | Including visual indicia |
| | 231 | Provided with means to purposely depress or contact receptacle contents |
| | 232 | Retained by bonding or adhesive means |
| | 233 | With hardenable liquid or plastic seal |
| | 234 | With liquid seal at closure seat on receptacle |
| | 235 | Closure pivoted about receptacle opening |
| | 246 | Shrinkable closure, fastener, or seal |
| | 247 | Self-sealing, piercable-type closure |
| | 250 | Frangible member or portion |
| | 251 | Outer closure breaks or tears away to expose second closure |
| | 252 | Twist-off motion frees reusable closure |
| | 253 | About line or point of weakness |
| | 257 | With cutting or tearing means (e.g., wire or string rip cord) |
| | 258 | Closure removal causes portion thereof to remain with receptacle |
| | 259 | Gas passes through a liquid |
| | 260 | With pressure-responsive valve |
| | 261 | Barrier permeable to gas and impermeable to liquid |
| | 262 | With vacuum breaker |
| | 263 | Nonresealable, nonremovable closure |
| | 264 | Applied from within receptacle |
| | 269 | Having an inflatable member |
| | 270 | With pressure-responsive seal |
| | 271 | Closure expands responsive to internal receptacle pressure |
| | 272 | Cap type with manually actuated means to contract depending skirt part |
| | 273 | With separate applied fastener to hold closure in closed portion |
| | 274 | Ring type |
| | 277 | Cap-type fastener |
| | 279 | Expanding fastener |
| | 280 | Clamping fastener |
| | 281 | Inclines to interrupted threads |
| | 283 | Screw actuated |
| | 284 | Lever actuated |
| | 286 | Bail type |
| | 287 | Spring |
| | 288 |  Coil |
| | 289 | Closure engaging spring arm hinged to receptacle or support thereon |
| | 290 | Spring clip traverses closure, with depending ends thereof diametrically gripping receptacle exterior |
| | 291 | Flexible tie |
| | 292 | Disk exerts radial force against cup-shaped closure within receptacle mouth or neck |
| | 293 | With attached nonintegral spring-type clamping fastener engaging exterior receptacle surface |
| | 294 | Stopper with attached, nonintegral clamp means engaging interior receptacle surface |
| | 295 | With means to facilitate closure removal |
| | 296 | Stopper-type closure |
| | 297 | Piercing-type closure extractor |
| | 298 | Disk-type closure with finger-engageable projection |
| | 299 | Permanently secured in stopper cavity |
| | 301 | Actuated by downwardly applied force |
| | 302 | Tool engaging means or closure or receptacle |
| | 303 | Separate opening means associated with closure |
| | 305 | Hand or finger engageable projection |
| | 306 | Retainer (e.g., closure tethered to receptacle) |
| | 307 | Receptacle interior communicable with exterior with closure in applied position (e.g., vented) |
| | 308 | Communicating through a filter |
| | 309 | With separate inlet and outlet passages |
| | 310 | Communicable through small, openable aperture in disk-type closure |
| | 311 | With valve |
| | 316 | Cap type |
| | 317 | Resilient distortion of closure skirt holds it in closed position |
| | 318 | Push on, twist off |
| | 319 | Specifically designed to accommodate plural sizes |
| | 320 | Combined with stopper structure |
| | 321 | Closure and receptacle having preformed, coacting configurations |
| | 322 | Slidable transverse to receptacle opening axis |
| | 323 | Skirt made of separate strip bent into cylinder |
| | 324 | Crimped flange or skirt portion |
| | 325 | Closure portion engagingly enters receptacle mouth |
| | 326 | Flexible material (e.g., paper or foil) |
| | 327 | Crimp deforms seal against receptacle |
| | 328 | With vertical corrugation (e.g., crown cap) |
| | 329 | Removably attached to receptacle by relative rotation between keepers (e.g., screw threads or lugs) |
| | 330 | With means to prevent unintentional rotation in closure releasing direction |
| | 331 | Projection engages keeper to stop rotation in closure applying direction |
| | 332 | Keeper has vertically and horizontally extending slots (e.g., bayonet) |
| | 333 | Keeper formed by bend in bead encircling lower edge of cap skirt |
| | 334 | Keeper formed only on inner wall of double-wall cap or consists of separate member on cap |
| | 335 | Keeper consists of separate member on receptacle |
| | 336 | Keeper consists of tab or strip struck from cap skirt |
| | 337 | Cap skirt impressed with circumferential inclined keeper indent, or with circumferentially spaced keeper indents |
| | 338 | Keeper shaved from inner surface of cap skirt |
| | 339 | Keeper formed by inward facing beads spaced along lower edge of cap skirt |
| | 340 | Keeper formed by horizontal flange projecting inward from lower edge of cap skirt |
| | 341 | With identifiable, integral, or separate gasket, seal, or liner |
| | 342 | Spring biased |
| | 343 | Depending sealing rib engages receptacle top |
| | 346 | Seal locks closure to receptacle |
| | 347 | Distinct layers |
| | 348 | Foam |
| | 349 | Disk |
| | 352 | Ring |
| | 353 | Having flaired skirt |
| | 354 | Closure portion engagingly enters receptacle mouth |
| | 355 | Stopper type |
| | 370 | END WALL STRUCTURE |
| | 371 | One-piece side and end wall |
| | 376 | Support structure |
| | 378 | Apertured end wall |
| | 379 | SIDEWALL STRUCTURE |
| | 380 | Having an inlet or outlet opening |
| | 381 | Pressure-responsive structure |
| | 382 | Contoured sidewall (e.g., curved, corrugated, ribbed, variable thickness, etc.) |
| | 385 | Apertured sidewall |
| | 386 | ATTACHMENT OR ADJUNCT |
| | 387 | Drinking device |
| | 390 | Tool or implement holder or attachment |
| | 392 | Drip-catching attachment |
| | 395 | Container support |
| | 400 | MISCELLANEOUS |
| CROSS-REFERENCE ART COLLECTIONS | ||
| | 900 | COLLAPSIBLE WALL STRUCTURE |
| | 901 | TAMPER-RESISTANT STRUCTURE |
| | 902 | VENT |
| FOREIGN ART COLLECTIONS | ||
| FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
| DIGESTS | ||
| | DIG1 | FINS |
| | DIG2 | COATINGS AND LAMINATIONS FOR MAKING OF BOTTLE CAPS |
| | DIG3 | MEDICAL |
| | DIG4 | CAPPING MATERIALS |
| | DIG5 | SPOONS |
| | DIG6 | RESIN-COATED BOTTLES |
| | DIG7 | WITH DRINKING CUP |
| | DIG8 | MIXING |