(290) DEPARTMENT OF COMMERCE
United States Patent and Trademark Office
[Docket No. PTO-P-2009-0038]
Pilot Program for Green Technologies
Including Greenhouse Gas Reduction
AGENCY: United States Patent and Trademark Office, Commerce.
ACTION: Notice.
SUMMARY: The United States Patent and Trademark Office (USPTO) is
implementing a pilot program in which an applicant may have an application
advanced out of turn (accorded special status) for examination, for
applications pertaining to green technologies including greenhouse gas
reduction (applications pertaining to environmental quality, energy
conservation, development of renewable energy resources or greenhouse gas
emission reduction). Currently, an application pertaining to environmental
quality, or energy conservation, development of renewable energy resources
or greenhouse gas reduction will not be advanced out of turn for
examination unless it meets the requirements of the accelerated examination
program. Under the Green Technology Pilot Program, applications pertaining
to environmental quality, energy conservation, development of renewable
energy, or greenhouse gas emission reduction, will be advanced out of turn
for examination without meeting all of the current requirements of the
accelerated examination program (e.g., examination support document). The
USPTO will accept only the first 3,000 petitions to make special in
previously filed new applications, provided that the petitions meet the
requirements set forth in this notice.
DATES: Effective Date: December 8, 2009.
Duration: The Green Technology Pilot Program will run for twelve months
from its effective date. Therefore, petitions to make special under the
Green Technology Pilot Program must be filed before December 8, 2010. The
USPTO may extend the pilot program (with or without modifications)
depending on the feedback from the participants and the effectiveness of
the pilot program.
FOR FURTHER INFORMATION CONTACT: Pinchus M. Laufer and Joni Y. Chang,
Senior Legal Advisors, Office of Patent Legal Administration, Office of the
Associate Commissioner for Patent Examination Policy, by telephone at
571-272-7726 or 571-272-7720; by facsimile transmission to 571-273-7726,
marked to the attention of Pinchus M. Laufer; or by mail addressed to: Mail
Stop Comments Patents, Commissioner for Patents, P.O. Box 1450, Alexandria,
VA 22313-1450.
SUPPLEMENTARY INFORMATION: New patent applications are normally taken up
for examination in the order of their United States filing date. See
section 708 of the Manual of Patent Examining Procedure (8th ed. 2001)
(Rev. 7, July 2008) (MPEP). The USPTO has a procedure under which an
application will be advanced out of turn (accorded special status) for
examination if the applicant files a petition to make special with the
appropriate showing. See 37 CFR 1.102 and MPEP Sec. 708.02. The USPTO
revised its accelerated examination program in June of 2006, and required
that all petitions to make special, except those based on applicant's
health or age or the Patent Prosecution Highway (PPH) pilot program, comply
with the requirements of the revised accelerated examination program. See
Changes to Practice for Petitions in Patent Applications To Make Special
and for Accelerated Examination, 71 FR 36323 (June 26, 2006), 1308 Off.
Gaz. Pat. Office 106 (July 18, 2006) (notice); see also MPEP Sec.
708.02(a). Applications that are accorded special status are generally
placed on the examiner's special docket throughout its entire course of
prosecution before the examiner, and have special status in any appeal to
the Board of Patent Appeals and Interferences (BPAI) and also in the patent
 Top of Notices (290) December 25, 2012 |
US PATENT AND TRADEMARK OFFICE |
1385 CNOG 1693 |
publication process. See MPEP Sec. 708.01 and 1309.
The USPTO is implementing a pilot program to permit applications
pertaining to "green technologies" (i.e., applications pertaining to
environmental quality, energy conservation, development of renewable energy
resources, or greenhouse gas emission reduction) to be advanced out of turn
without meeting all of the current requirements of the accelerated
examination program set forth in item VIII of MPEP Sec. 708.02(a) (e.g.,
examination support document). The USPTO will accept the first 3,000
petitions to make special under the Green Technology Pilot Program in
previously filed new applications, provided that the petitions meet all of
the requirements set forth in this notice. Upon receipt of more than 3,000
petitions, the USPTO may reevaluate the workload and resources needed to
extend the pilot program.
Applications that are accorded special status under the Green Technology
Pilot Program will be placed on an examiner's special docket prior to the
first Office action, and will have special status in any appeal to the BPAI
and also in the patent publication process. Applications accorded special
status under the Green Technology Pilot Program, however, will be placed on
the examiner's amended docket, rather than the examiner's special docket,
after the first Office action (which may be an Office action containing
only a restriction requirement).
Applicant may participate in the Green Technology Pilot Program by
filing a petition to make special that meets all of the requirements set
forth in this notice in a previously filed application. No fee is required.
The $130.00 fee for a petition under 37 CFR 1.102 (other than those
enumerated in 37 CFR 1.102(c)) is hereby sua sponte waived for petitions to
make special based upon the procedure specified in this notice. In
addition, continuing applications will not automatically be accorded
special status based on papers filed with a petition in a parent
application. Each continuing application must on its own meet all
requirements for special status.
Paperwork Reduction Act: This notice involves information collection
requirements which are subject to review by the Office of Management and
Budget (OMB) under the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et
seq.). The collections of information involved in this rule have been
reviewed and approved by OMB under the emergency processing provisions of 5
CFR 1320.13. The USPTO will publish the notices required by 5 CFR part 1320
in due course.
I. Requirements: A petition to make special under the Green Technology
Pilot Program may be granted in an application if the eligibility
requirements set forth in section II or III and the following conditions
are satisfied:
(1) The application must be a non-reissue, non-provisional utility
application filed under 35 U.S.C. 111(a), or an international application
that has entered the national stage in compliance with 35 U.S.C. 371. The
application must be previously filed before the publication date of this
notice. Reexamination proceedings are excluded from this pilot program.
(2) The application must be classified in one of the U.S.
classifications listed in section VI of this notice at the time of
examination. See section VI for more information.
(3) The application must contain three or fewer independent claims and
twenty or fewer total claims. The application must not contain any multiple
dependent claims. For an application that contains more than three
independent claims or twenty total claims, or multiple dependent claims,
applicants must file a preliminary amendment in compliance with 37 CFR
1.121 to cancel the excess claims and/or the multiple dependent claims at
the time the petition to make special is filed.
| Top of Notices (290) December 25, 2012 |
US PATENT AND TRADEMARK OFFICE |
1385 CNOG 1694 |
(4) The claims must be directed to a single invention that materially
enhances the quality of the environment, or that materially contributes to:
(1) The discovery or development of renewable energy resources; (2) the
more efficient utilization and conservation of energy resources; or (3)
greenhouse gas emission reduction (see the eligibility requirements of
sections II and III of this notice). The petition must include a statement
that, if the USPTO determines that the claims are directed to multiple
inventions (e.g., in a restriction requirement), applicant will agree to
make an election without traverse in a telephonic interview, and elect an
invention that meets the eligibility requirements in section II or III of
this notice and is classified in one of the U.S. classifications listed in
section VI of this notice. See section V of this notice for more
information.
(5) The petition to make special must be filed electronically before
December 8, 2010, using the USPTO electronic filing system, EFS-Web, and
selecting the document description of "Petition for Green Tech Pilot" on
the EFS-Web screen. Applicant should use form PTO/SB/420, which will be
available as a Portable Document Format (PDF) fillable form in EFS-Web and
on the USPTO Web site at http://www.uspto.gov/web/forms/index.html.
Information regarding EFS-Web is available on the USPTO Web site at
http://www.uspto.gov/ebc/index.html.
(6) The petition to make special must be filed at least one day prior
to the date that a first Office action (which may be an Office action
containing only a restriction requirement) appears in the Patent
Application Information Retrieval (PAIR) system. Applicant may check the
status of the application using PAIR.
(7) The petition to make special must be accompanied by a request for
early publication in compliance with 37 CFR 1.219 and the publication fee
set forth in 37 CFR 1.18(d).
II. Eligibility Requirements--Applications Pertaining to Environmental
Quality: Patent applications for inventions which materially enhance the
quality of the environment under the conditions specified in item V of MPEP
Sec. 708.02 will be eligible for the Green Technology Pilot Program. For
an application pertaining to environmental quality, the petition to make
special must state that special status is sought because the invention
materially enhances the quality of the environment by contributing to the
restoration or maintenance of the basic life-sustaining natural elements.
If the application does not clearly disclose that the claimed invention
materially enhances the quality of the environment by contributing to the
restoration or maintenance of one of the basic life-sustaining natural
elements, the petition must be accompanied by a statement signed by the
applicant, assignee, or an attorney/agent registered to practice before the
USPTO, in accordance with 37 CFR 1.33(b) explaining how the materiality
standard is met. The materiality standard does not permit an applicant to
speculate as to how a hypothetical end-user might specially apply the
invention in a manner that could materially enhance the quality of the
environment. Nor does such standard permit an applicant to enjoy the
benefit of advanced examination merely because some minor aspect of the
claimed invention may enhance the quality of the environment. See MPEP Sec.
708.02 (item V).
III. Eligibility Requirements--Applications Pertaining to Energy
Conservation, Development of Renewable Energy Resources, or Greenhouse Gas
Emission Reduction: Patent applications are also eligible for the Green
Technology Pilot Program if the applications are for inventions that
materially contribute to: (1) The discovery or development of renewable
energy resources; (2) the more efficient utilization and conservation of
energy resources; or (3) the reduction of greenhouse gas emissions. The
term "renewable energy resources" for purposes of the procedure specified
in this notice includes hydroelectric, solar, wind, renewable biomass,
landfill gas, ocean (including tidal, wave, current, and thermal),
geothermal, and municipal solid waste, as well as the transmission,
| Top of Notices (290) December 25, 2012 |
US PATENT AND TRADEMARK OFFICE |
1385 CNOG 1695 |
distribution, or other services directly used in providing electrical
energy from these sources. The second category would include inventions
relating to the reduction of energy consumption in combustion systems,
industrial equipment, and household appliances. The third category listed
above would include, but is not limited to, inventions that contribute to
(1) advances in nuclear power generation technology, or (2) fossil fuel
power generation or industrial processes with greenhouse gas-abatement
technology (e.g., inventions that significantly improve safety and
reliability of such technologies).
The petition to make special for an application directed to development
of renewable energy or energy conservation, or directed to greenhouse gas
emission reduction, must state the basis for the special status (i.e.,
whether the invention materially contributes to (1) development of
renewable energy resources or energy conservation, or (2) greenhouse gas
emission reduction). If the application disclosure is not clear on its face
that the claimed invention materially contributes to (1) development of
renewable energy or energy conservation, or (2) greenhouse gas emission
reduction, the petition must be accompanied by a statement signed by the
applicant, assignee, or an attorney/agent registered to practice before
the USPTO, in accordance with 37 CFR 1.33(b) explaining how the materiality
standard is met. The materiality standard does not permit an applicant to
speculate as to how a hypothetical end-user might specially apply the
invention in a manner that could materially contribute to (1) development
of renewable energy or energy conservation, or (2) greenhouse gas emission
reduction, nor does the standard permit an applicant to enjoy the benefit
of advanced examination merely because some minor aspect of the claimed
invention may be directed to (1) development of renewable energy or energy
conservation, or (2) greenhouse gas emission reduction. See MPEP Sec.
708.02 (item VI).
IV. Decision on Petition to Make Special Under the Green Technology Pilot
Program: If applicant files a petition to make special under the Green
Technology Pilot Program, the USPTO will decide on the petition once the
application is in condition for examination. If the petition is granted,
the application will be accorded special status under the Green Technology
Pilot Program. The application will be placed on the examiner's special
docket prior to the first Office action, and will have special status in
any appeal to the BPAI and also in the patent publication process. The
application, however, will be placed on the examiner's amended docket,
rather than the examiner's special docket, after the first Office action
(which may be an Office action containing only a restriction requirement).
If applicant files a petition to make special under the Green Technology
Pilot Program that does not comply with the requirements set forth in this
notice, the USPTO will notify the applicant of the deficiency by issuing a
notice and applicant will be given only one opportunity to correct the
deficiency. If applicant still wishes to participate in the Green
Technology Pilot Program, applicant must file a proper petition and make
appropriate corrections within one month or thirty days, whichever is
longer. The time period for reply is not extendable under 37 CFR 1.136(a).
If applicant fails to correct the deficiency indicated in the notice within
the time period set forth therein, the application will not be eligible for
the Green Technology Pilot Program and the application will be taken up for
examination in accordance with standard examination procedures.
V. Requirement for Restriction: If the claims in the application are
directed to multiple inventions, the examiner may make a requirement for
restriction in accordance with current restriction practice prior to
conducting a search. The examiner will contact the applicant and follow the
procedure for the telephone restriction practice set forth in MPEP Sec.
812.01. Applicant must make an election without traverse in a telephonic
interview, and elect an invention that meets the eligibility requirements
in section II or III of this notice and that is classified in one of the
U.S. classifications listed in section VI of this notice. See items 2 and 4
of section I of this notice. If the examiner cannot reach the applicant
| Top of Notices (290) December 25, 2012 |
US PATENT AND TRADEMARK OFFICE |
1385 CNOG 1696 |
after a reasonable effort or applicant refuses to make an election in
compliance with item 4 of section I of this notice, the examiner will treat
the first claimed invention that meets the requirements in section II or
III and section VI as constructively elected without traverse for
examination.
VI. Classification Requirement: The classification requirement set forth in
this section of the notice will assist the USPTO to balance the workload
and gauge resources needed to achieve the goals of the Green Technology
Pilot Program. The USPTO recognizes that certain patent applications
pertaining to green technologies may be excluded by this requirement. After
the twelve-month duration of the pilot program, the USPTO may extend the
pilot program to include more classifications depending on the
effectiveness of the pilot program and the resources availability.
In order to be eligible for the Green Technology Pilot Program, the
application must be classified in one of the U.S. patent classifications
("USPCs") listed below at the time of examination. The classification
descriptions are provided as helpful information, and they will not be used
in determining whether an application is eligible. An applicant may suggest
a classification for the application, but the applicant may not know the
classification of the application at the time of filing a petition to make
special under the Green Technology Pilot Program. The USPTO will determine
whether this requirement is satisfied once the application is in condition
for examination and the petition is being decided.
The following is a list of the eligible classifications:
A. Alternative Energy Production
1. Agricultural waste (USPC 44/589).
2. Biofuel (USPC 44/605; 44/589).
3. Chemical waste (USPC 110/235-259, 346).
4. For domestic hot water systems (USPC 126/634-680).
5. For passive space heating (USPC 52/173.3).
6. For swimming pools (USPC 126/561-568).
7. Fuel cell (USPC 429/12-46).
8. Fuel from animal waste and crop residues (USPC 44/605).
9. Gasification (USPC 48/197R, 197A).
10. Genetically engineered organism (USPC 435/252.3-252.35, 254.11-254.9,
257.2, 325-408, 410-431).
11. Geothermal (USPC 60/641.2-641.5; 436/25-33).
12. Harnessing energy from man-made waste (USPC 75/958; 431/5).
13. Hospital waste (USPC 110/235-259, 346).
14. Hydroelectric (USPC 405/76-78; 60/495-507; 415/25).
15. Industrial waste (USPC 110/235-259, 346).
16. Industrial waste anaerobic digestion (USPC 210/605).
17. Industrial wood waste (USPC 44/589; 44/606).
18. Inertial (e.g., turbine) (USPC 290/51, 54; 60/495-507).
19. Landfill gas (USPC 431/5).
20. Municipal waste (USPC 44/552).
21. Nuclear power--induced nuclear reactions: processes, systems,
and elements (USPC 376/all).
22. Nuclear power--reaction motor with electric, nuclear, or
radiated energy fluid heating means (USPC 60/203.1).
23. Nuclear power--heating motive fluid by nuclear energy (USPC 60/
644.1) Photovoltaic (USPC 136/243-265).
24. Refuse-derived fuel (USPC 44/552).
25. Solar cells (USPC 438/57, 82, 84, 85, 86, 90, 93, 94, 96, 97).
26. Solar energy (USPC 126/561-714; 320/101).
27. Solar thermal energy (USPC 126/561-713; 60/641.8-641.15).
28. Water level (e.g., wave or tide) (USPC 405/76-78; 60/495-507).
29. Wind (USPC 290/44, 55; 307/64-66, 82-87; 415/2.1).
B. Energy Conservation
| Top of Notices (290) December 25, 2012 |
US PATENT AND TRADEMARK OFFICE |
1385 CNOG 1697 |
1. Alternative-power vehicle (e.g., hydrogen) (USPC 180/2.1-2.2,
54.1).
2. Cathode ray tube circuits (USPC 315/150, 151, 199).
3. Commuting, e.g., HOV, teleworking (USPC 705/13).
4. Drag reduction (USPC 105/1.1-1.3; 296/180.1-180.5; 296/181.5).
5. Electric lamp and discharge devices (USPC 313/498-512, 567-643).
6. Electric vehicle (USPC 180/65.1; 180/65.21; 320/109; 701/22;
310/1-310).
7. Emission trading, e.g., pollution credits (USPC 705/35-45).
8. Energy storage or distribution (USPC 307/38-41; 700/295-298;
713/300-340).
9. Fuel cell-powered vehicles (USPC 180/65.21; 180/65.31).
10. Human-powered vehicle (USPC 180/205; 280/200-304.5).
11. Hybrid-powered vehicle (USPC 180/65.21-65.29; 73/35.01-35.13,
112-115, 116-119A, 121-132).
12. Incoherent light emitter structure (USPC 257/79, 82, 88-90, 93,
99-103).
13. Land vehicle (USPC 105/49-61 (electric trains); 180/65.1-65.8
(electric cars)).
14. Optical systems and elements (USPC 359/591-598).
15. Roadway, e.g., recycled surface, all-weather bikeways (USPC
404/32-46).
16. Static structures (USPC 52/309.1-309.17, 404.1-404.5, 424-442,
783.1-795.1).
17. Thermal (USPC 702/130-136).
18. Transportation (USPC 361/19, 20, 141, 152, 218).
19. Watercraft drive (electric powered) (USPC 440/6-7).
20. Watercraft drive (human powered) (USPC 440/21-32).
21. Wave-powered boat motors (USPC 440/9).
22. Wind-powered boat motors (USPC 440/8).
23. Wind-powered ships (USPC 114/102.1-115).
C. Environmentally Friendly Farming
1. Alternative irrigation technique (USPC 405/36-51).
2. Animal waste disposal or recycling (USPC 210/610-611; 71/11-30).
3. Fertilizer alternative, e.g., composting (USPC 71/8-30).
4. Pollution abatement, soil conservation (USPC 405/15).
5. Water conservation (USPC 137/78.2-78.3; 137/115.01-115.28).
6. Yield enhancement (USPC 504).
D. Environmental Purification, Protection, or Remediation
1. Biodegradable (USPC 383/1; 523/124-128; 525/938; 526/914).
2. Bio-hazard, Disease (permanent containment of malicious virus,
bacteria, prion) (USPC 588/249-249.5).
3. Bio-hazard, Disease (destruction of malicious virus, bacteria,
prion) (USPC 588/299).
4. Carbon capture or sequestration (USPC 95/139-140; 405/129.1-
129.95; 423/220-234).
5. Disaster (e.g., spill, explosion, containment, or cleanup) (USPC
405/129.1-129.95).
6. Environmentally friendly coolants, refrigerants, etc. (USPC 252/
71-79).
7. Genetic contamination (USPC 422/1-43).
8. Hazardous or Toxic waste destruction or containment (USPC 588/1-
261).
9. In atmosphere (USPC 95/57-81, 149-240).
10. In water (USPC 210/600-808; 405/60).
11. Landfill (USPC 405/129.95).
12. Nuclear waste containment or disposal (USPC 588/1-20, 400).
13. Plants and plant breeding (USPC 800/260-323.3).
14. Post-consumer material (USPC 264/36.1-36.22, 911-921; 521/40-
49.8).
15. Recovery of excess process materials or regeneration from waste
stream (USPC 162/29, 189-191; 164/5; 521/40-49.8; 562/513).
| Top of Notices (290) December 25, 2012 |
US PATENT AND TRADEMARK OFFICE |
1385 CNOG 1698 |
16. Recycling (USPC 29/403.1-403.4; 75/401-403; 156/94; 264/37.1-
37.33).
17. Smokestack (USPC 110/345; 422/900).
18. Soil (USPC 405/128.1-128.9, 129.1-129.95).
19. Toxic material cleanup (USPC 435/626-282).
20. Toxic material permanent containment or destruction (USPC 588/
all).
21. Using microbes or enzymes (USPC 435/262.5).
November 30, 2009 DAVID J. KAPPOS
Under Secretary of Commerce for
Intellectual Property and Director of the
United States Patent and Trademark Office
[1349 OG 362]